73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Instrumentation => Topic started by: 313C10 on October 27, 2010, 07:05:51 pm
-
Anybody have pic's of Tach install location? I was leaning towards a larger unit for top of dash.Also any info on the pillar pods.Thank you
-
I prefer the in dash tach. Not a fan of the tach mounted on the dash but this is where I used to always mount mine before I got sick of looking at them
(http://i6.photobucket.com/albums/y228/Sabaka454/gmcdoor.jpg)
-
(http://i638.photobucket.com/albums/uu103/armor64/New%20Installs/CIMG0183.jpg)
i put mine in the empty hole, works great with a little mod to the stock cluster backing
-
.
-
that last sentence didn't make sense, but you can swap out a speedo with the sensor in it.
-
I prefer the in dash tach. Not a fan of the tach mounted on the dash but this is where I used to always mount mine before I got sick of looking at them
(http://i6.photobucket.com/albums/y228/Sabaka454/gmcdoor.jpg)
Vile that is one cool door panel !!!
How/where did you get them??
-
I have mine on the top d/s dash, attached with the lower screw for the A-pillar trim, but I caution you that this interferes with the defroster's ability to keep the side window clear.
-
Thanks Grim, Ill keep that in mind foggy windows are a pain! And vile I also like the panels Im saving up to diamond plate mine.Thanks for the pics guys!
-
I put mine on the a-pillar. Didn't want to cut my non-cracked dash.
-
I second that,nice interior VileZambonie.
I ussually clamp mine on the steering colum.
-
(http://i160.photobucket.com/albums/t195/wes2880/78%20C20/Interior-Guages.jpg)
-
(http://i640.photobucket.com/albums/uu122/genosis/MuchBetter.jpg)
Only so many places to mount a wall clock.
-
I put mine by the pillar, just bent the mounting piece to slip between the dash pad and pillar.
-
Mine is on the column also with a clamp but now I cannot use my tilt.
-
Mine is on the collumn! (: Sorry if the picture is huge. :/
(https://mail.google.com/mail/?ui=2&ik=677c11d9f3&view=att&th=12d064b8ecb6321e&attid=0.1&disp=emb&zw)
-
Mine is where the factory had it-
(http://i81.photobucket.com/albums/j228/topprolmc/87%20K5/2010-11-23_18-26-39_295.jpg)
-
I usually attach it to the steering column with a huge hose clamp. In my new project I am going to get a new bezel from corvan's classics, I think, and install all new aftermarket gauges in the dash where they belong.
-
(http://i160.photobucket.com/albums/t195/wes2880/78%20C20/Interior-Guages.jpg)
What size tach is that, 78 Chevyrado?