73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: project85 on October 29, 2010, 05:05:28 am
-
Hey everybody,
I'm new to the site and also a new owner of an 85 c-10. Excited to start tearing down so I can build it back up. I wanted to ask is the any good interchange books out there or is it safe that most parts from 81 to 87 will swap and fit my 85?? Thanks
-
Pretty much all 81-87 interchange. 84 on up for steering column and dash.
-
welcome and good luck on your project.
-
Welcome. Once you've been reading through this site for a while you'll get the idea of what things changed and when. Any questions just post 'em up and someone here will know.
-
thanks. this truck is an 85. the steering column has the wipers, high beams on the directional lever. is this right or is it an aftermarket or newer column? it has a 3 speed on the floor. under the hood i can see where it looks like it was a column shift manual transmission originally. any input would be great. thanks
-
Yes, the integrated wiper/dimmer switch started in 1984 so yours is correct to the truck.
-
awsome thanks. i'll probably be asking all kinds of questions for a few months getting up to speed with this truck.
thanks
-
Three speed stick only came on the column. The SM465 has 4 gears but is really a 3 speed with low. They are on the floor.
Welcome from New Hampshaa.
-
It looks like the guy before me converted the 3speed on the column to the floor. Hopefully he did it right and I won't have to back track that too.
-
90% of those floor shifters even when done right are junk!
-
i know the 3 speed is horrible >:(. it seems to work and shift fine just not very fun to drive. you have to reach so far to go to second gear. i rather be pulling second down then pushing it under the ash tray. i'll definetily be putting a 4 speed in at some point.