73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Power Windows & Door Locks => Topic started by: Harmon on November 14, 2010, 11:18:53 am

Title: Power window Wire to Switch problem
Post by: Harmon on November 14, 2010, 11:18:53 am

Been driving truck with one door panel because my PASS side power window wire which is in the Black plug that plugs into the back of the power window switch is broke.  I cant get the metal end to stay on the wire.

anyone have any idea if I can buy a pig tail for this?


thanks

Title: Re: Power window Wire to Switch problem
Post by: Dr_Snooz on November 14, 2010, 06:28:57 pm

I might not be understanding the problem. Why can't you just use a crimp connection?

Title: Re: Power window Wire to Switch problem
Post by: Harmon on November 14, 2010, 06:46:49 pm

The power wire's metal connector that goes into the black plug broke off.  I cant get the connector to open up so I could sodder the wire back into it.  Therefore I am at a loss as to what to do

Title: Re: Power window Wire to Switch problem
Post by: topp on November 14, 2010, 07:03:59 pm

Search the internet for the whole piece, buy it, then cut and splice....I used to have a link to that connector, so I know it's out there.

Go to junkyard, cut it out of a junk truck, splice it in...

Title: Re: Power window Wire to Switch problem
Post by: BullFawg on February 01, 2011, 07:58:03 pm

Call Specialty Power Windows in GA. THey have the new pigtails. THe numer is 800-634-9801

Title: Re: Power window Wire to Switch problem
Post by: KY..Rob on February 01, 2011, 08:05:08 pm

Or, You could go to the classifieds under (parts for sale) and look for "Free stuff" Someone might have the whole passanger side harness with switches and all? You might have to split the shipping with them, Probably a couple of bucks.