73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: discot315 on November 22, 2010, 04:01:13 pm
-
I just got my new motor in and completly back together and started it and had it running but the heater core decided to go like the 3rd time I started it. So I got the new heater core because the old one actually broke where the hose attaches, But I dont know how to get to the heater core. I took the cover off that covers the blower motor and I can see the heater core but cant get at it, Im thinking I have to from the inside. I took the glove box off and was looking and theres just like a big black plastic piece covering everything. Do I have to take all that out to get at it? Any tips would help out alot. Thanks
-
Does this help?
From the technical section:
http://forum.73-87chevytrucks.com/smforum/index.php?topic=1949.0
-
Yeah that does, Didnt know it would be such a big job. Thanks for the reply!
I searched the site a bit before I posted my question guess I didnt search good enough.
-
its not as bad as it sounds at least i thought anyway i did mine in about an hour and a half theres 4 studs that go through the firewall one is a pita to get to so i just pulled out the stud with visegrips but its not that bad get you a Haynes repair manual money well spent