73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: monte0185 on January 30, 2011, 08:51:25 pm
-
Did some work this weekend. 3/5 DJM drop with 20x10 rear and 18x8 fronts. I think it may need to go an inch lower in the front. Gonna put some Thicker tires on first though.
Before
(http://bigtjohnsons.com/images/86%20Chevy/DSC01351.JPG)
After
(http://bigtjohnsons.com/images/86%20Chevy/DSC01369.JPG)
(http://bigtjohnsons.com/images/86%20Chevy/DSC01370.JPG)
(http://bigtjohnsons.com/images/86%20Chevy/DSC01361.JPG)
-
I think you are right, by your pic's it would look better lower in the front. Very nice job by the way, much better looking. ;D
-
Yep. Would look better a tad lower in the fron, But you can trim a tad off the spring for that , Nice tire and wheel size , but I aint feeling the mustang type wheels.
-
Front definitely needs to come down some, but give the springs some time to settle before you go further.
I like those wheels!
-
I'm almost thinking of maybe waiting to trim the springs and maybe trying a 20x8 wheel in the front instead of a 18x8.
-
I think the 20" up front would make it look better.
-
I think the 20" up front would make it look better.
As long as there is 20s in the rear as well.
-
I think the 20" up front would make it look better.
As long as there is 20s in the rear as well.
Yes rears are 20x10's. These are rims I had on my vette project that isnt going to get finished so Im canabalizing it for the truck. I have a mosier 9" under it that will be going in the truck eventually with a IFS front. But thats awhile down the road yet.