73-87chevytrucks.com

General Site Info => General Discussion => Topic started by: JRod1984 on February 20, 2011, 01:29:18 pm

Title: 1984 Chevy Transfer Case Torque Specifications
Post by: JRod1984 on February 20, 2011, 01:29:18 pm

Hey guys, I've been looking around and can't find any specifications on how tight to tighten my fill and drain plugs on my np 208 transfer case. I've got a Chilton's manual but I can't find any info about that in there. Any help would be greatly appreciated.

Title: Re: 1984 Chevy Transfer Case Torque Specifications
Post by: bake74 on February 20, 2011, 02:50:08 pm

     I have never seen torque spec's on them.  I just tighten them until at least 3 full threads are in and until they feel tight and check for leaks.  Never had one leak before.

Title: Re: 1984 Chevy Transfer Case Torque Specifications
Post by: Captkaos on February 22, 2011, 07:11:53 pm

Just tight. 

Title: Re: 1984 Chevy Transfer Case Torque Specifications
Post by: VileZambonie on February 22, 2011, 07:14:23 pm

18 lb-ft on the fill and drain plug. 30mm socket.