73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: audrima on February 26, 2011, 05:42:14 pm
-
hiya :D just 2 little questions.
1. I have a grant(I belive) steering wheel that I had for a broncoII/ranger. that I like to put on my gmc to replace the icky sticky one. where can I get an adapter set for it?
2. my heat is not working. I think the blower is filled with micey stuff. but before that. the heat never turned off my dad unplugged it before it sat is this normal?
hm o ya cheap replacement for the am radio? I know I have to wire speakers I have some. but no radio that will work. I just need fm/cassette so I can play my iphone though it. ^_^
Thanks everyone :D
Mariah
-
Your local parts store should have the adaptor for the steering wheel pretty cheap. Yes the blower motor blows all the time, check here http://forum.73-87chevytrucks.com/smforum/index.php?topic=19365.0 for an upgrade for your blower motor that is well worth the money.
-
thanks Bake :D guess when I go get new headlights I will check to see if advanced auto has one then. :D
-
has your dash been cut for a newer radio yet?
-
no ^_^ Still have the factory am radio sitting in her :) any advice on now to put a newer radio in her? I'm thinking of moving my havc down there and installing a 7in screen above it but have not decided yet. ^_^
-
Since you used the term hvac. I take it you do have some skills to do a radio. But use directions most time if you look at the wires coming off the radio “aftermarket” its printed on them what they go to. I think others have had the ideal about moving the controls. Don’t think they went threw with it tho
-
I've dabbled in radios and car computers. but almost all in newer cars. I'll see what I can do. thanks Irish :)
-
Get this and follow the instructions!
http://www.metraonline.com/part/87-99-3052
-
Mariah,
see my post on advance auto to save yourself a few bucks
Scott
-
Get this and follow the instructions!
http://www.metraonline.com/part/87-99-3052
You just became my hero Erik! I was gettin ready to make a peice to stiffen up the dash around my deck.