73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: benzesrule on May 26, 2011, 09:09:06 am

Title: Fuel selector valve
Post by: benzesrule on May 26, 2011, 09:09:06 am

I just installed a new Fuel Selector Valve from autozone, part number FSV1. It won't switch when I push the switch on the dash. Its also new from autozone. Well I called the wells(the manufacturer) and they said that I would have to install a new switch(Sw48). Has anyone else had to do this? I have power down to the switch but it doesn't switch( atleast I can't hear it).

Title: Re: Fuel selector valve
Post by: benzesrule on May 26, 2011, 09:59:27 am

Well to make along story short. I didn't need to replace the switch. I removed the seal off of the plug at the valve and plugged it in and it works. I put the seal back on and pushed the plug on as far as i could and it still works!!! So much for calling the manufacturer!!!

Title: Re: Fuel selector valve
Post by: beastie_3 on May 26, 2011, 02:16:58 pm

glad you found the problem.

Title: Re: Fuel selector valve
Post by: benzesrule on May 26, 2011, 08:48:00 pm

Thanks!!! Me too!!!!