73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: TxFiddler on May 28, 2011, 12:22:25 am
-
I read about this on here. Took a couple pics when I put the drop spindles on.
(http://i1206.photobucket.com/albums/bb447/TxFidd1er/IMG-20110527-00088.jpg)
Take a piece of 3/8 tread stock and basically put a nut on it under the top of the spindle and tighten. The lower ball joint will pop out pretty easy.
(http://i1206.photobucket.com/albums/bb447/TxFidd1er/IMG-20110527-00089.jpg)
I put a vice grip on the end of the stock and assisted in the turning.
This is really simple to do.