73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: bigblockchevelleman on July 13, 2011, 10:38:19 am
-
been reading alot of posts but can't seem to find what answers I'm looking for. here goes I have a 1987 chevy r10 silverado I want to lower and looking for best ride wanting to know all the in and outs of installing airbags . What all is needed ?? besides the airbags, compressor what about upper and lower control arms ?? spindles ? I really want to stay with 15 inch wheels. thanks so much Steve
-
How low? Lowering spindles and a reverse flip kit in rear retains factory ride and front end geometry. You can still use it as a truck except for heavier loads will hit the rubber stops in back.
-
theres a ton of variables man. options are endless. time, budget, skills, are all factors. i sent you a pm.
-
Thanks so much Big Bear ;D skill level I think I can cover ( LOL ) maybe ::) The truck was my dads and just really wanting to fix the truck the way he would have like it . reason for the air bag I want to be able to slam the truck if wanted . no problem with the notching of the frame , cutting the bed etc.......... just checking and looking for what might come up . things you miss or don't see . Thanks Steve
-
Buy a complete kit from Ridetech, it will come with all you need to lower it if you are looking for a one stop shop. The only outside think you would need is spindles for the front. I recommend 2.5" or 3" spindles, keep in mind a lot of 3" ones require trimming the lower control arms.
-
no prob man...keep us posted on what you choose to do