73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Senck243 on July 23, 2011, 01:07:42 pm

Title: Fuel injection to carb swap
Post by: Senck243 on July 23, 2011, 01:07:42 pm

I just got a 89 350 out of a 3/4 ton and want to put it in my 84 half ton. What do I need to swap on to the motor to convert it to carburetor? Any help is appreciated

Title: Re: Fuel injection to carb swap
Post by: topp on July 23, 2011, 01:14:21 pm

Either swap the heads for older ones (intake bolt pattern is different on TBI heads) or get an "adapted" intake manifold..

Title: Re: Fuel injection to carb swap
Post by: Senck243 on July 23, 2011, 01:25:06 pm

Do you know who makes an adapted intake. Thanks for the info

Title: Re: Fuel injection to carb swap
Post by: Senck243 on July 25, 2011, 10:17:41 pm

Anyone know?

Title: Re: Fuel injection to carb swap
Post by: Captkaos on July 25, 2011, 11:00:35 pm

Edelbrock should.

Title: Re: Fuel injection to carb swap
Post by: TexasRed on July 27, 2011, 04:41:38 pm

http://www.summitracing.com/search/Department/Air-Fuel-Delivery/Section/Intake-Manifolds/Part-Type/Intake-Manifolds-Carbureted/Engine-Type/V8/Make/CHEVROLET/Engine-Size/5-7L-350/Year/1989/?Ns=Rank|Asc

Some of them say something about a "bushing" for the later model heads.