73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: JDaniel on August 13, 2011, 01:59:00 am
-
Hi all,
Because i didn't want to make holes in my doors i was i search for an onther solution, i saw the pics here of the cab corners that they sell here and made a pair on my own.
You just need a piece of sheetmetal and some handy hands ;D
here some pics:
FRONT
(http://i244.photobucket.com/albums/gg3/PeterPVL/My%201980%20GMC%20Sierra%20classic%20stepside/0072.jpg)
REAR
(http://i244.photobucket.com/albums/gg3/PeterPVL/My%201980%20GMC%20Sierra%20classic%20stepside/0082.jpg)
INSTALLED
(http://i244.photobucket.com/albums/gg3/PeterPVL/My%201980%20GMC%20Sierra%20classic%20stepside/017.jpg)
-
Thats some real good work. I like that theyre rounded on the front, think a 6x9 would fit well?
-
yes they should fit also. ;)
-
How big a piece of sheet metal did you end up using for each side?
-
How big a piece of sheet metal did you end up using for each side?
i made the 2 corners out of a piece of plate of 50cm by 50cm
-
How big a piece of sheet metal did you end up using for each side?
i made the 2 corners out of a piece of plate of 50cm by 50cm
Or 20 inches by 20 inches roughly. :D
-
great job! anyone know where a person with very little tools could purchase a set?
-
theres a guy on here that sells them. at least he did last i knew. i cant remember his name for the life of me. hmm. im sure somebody will chime in.
-
www.73-87.com Jeff (bigblock73) sells them and some other cool little trinkets for our trucks.
-
thats him...thanks man