73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Instrumentation => Topic started by: bigchevyc30 on September 25, 2011, 06:01:34 pm
-
OK so on my dually the voltage gauge is acting up it will stick sometimes when i drive my truck and when i tap on it it will go to its normal reading and since i got another gauge in my gauge cluster from autozone that came with the oil water and voltage and im wanting to make sure its reading right all the time. Please if you can tell me were to hook my wires up to ill greatly appreciate it
-
In my sunpro trio cluster my volt gauge instructions told me to just hook it into a fuse on the fusebox. I just used a brass fuse tap that goes over the spade and has a male end sticking out above the fuse when installed. I believe the instructions said to put it on the top side of the fuse so it reads the voltage coming in. Mine works great
-
either side of the fuse will work but the power one going in wont be protected and the other one will. but it seems you might have a faulty gauge.
-
this is y i am wanting to get the new gauge working so i know its right
-
either side of the fuse will work but the power one going in wont be protected and the other one will. but it seems you might have a faulty gauge.
:-X Yup....that makes sense too that's what I get for trying to go off memory. :D