73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: Senck243 on October 14, 2011, 12:20:39 am
-
Working out the bugs in my 84 k10 plow truck for the season. I am missing the inspection plate for the bell housing on my sm465. How vital is this? I ordered one from gmpartsdirect.com but in no way is it right and they won't take it back. Does anyone have one they want to sell?
-
My inspection plate got bent and was rubbing the flywheel. I took it off and its been off for over a year. Its mainly to keep debris out, but ive taken it offroading and mudding and never haf any problems with my clutch or starter or anything.
-
I am just worried about stuff getting in there and making the clutch slip
-
Do you have any Pick - n - pull type yards around you, they should be really cheap.
-
Not many. Everyone I called doesn't have anything older than early 1990s.
-
Check around on craigslist in your area for someone selling an sm465 and sre if you can buy thr plate for like 20 bucks
http://phoenix.craigslist.org/search/pts?query=Sm465&srchType=A&minAsk=&maxAsk= (http://phoenix.craigslist.org/search/pts?query=Sm465&srchType=A&minAsk=&maxAsk=)
-
Yea looked everyone is asking a pretty penny for these trannys or they don't have the plate
-
I can see if i can find mine. The upper inside corner on one side got bent in and rubbed on the flywheel. I found it was bent and didnt want to climb back under my truck to put it back on. If I can find it, you can have it if you pay for shipping. It could easily be straightened.
-
Thanks 1979c20. Let me know I can paypal you.