Post by: wideboots on March 21, 2006, 03:40:00 pm
I am about to buy a very expensive set of new wheels for my truck. I think the lug nut size is 7/16" but my mind has gone blank. The truck is in the paint shop so it is not available to me right now. The truck is a 78 1/2 ton step side with factory stock disk brakes in front. Better brakes will come later especially on the rear. I know the bolt circle is 5" because I checked that. It is called a 5 on 5 bolt circle I believe. Now please let me know if the stock lug nut size is 7/16 then I can place my order for the wheels. Thanks a bunch guys. Without you I would be in serious trouble with this truck project.
Post by: VileZambonie on March 21, 2006, 09:17:00 pm
Post by: 81ChevyCheyenne on March 23, 2006, 01:37:00 pm
K - 7/16" Bolts (6)
C10,P10,G10,G20 - 1/2" Bolts (5)
C20, P20, C30,P30 and K20,G30 Single Wheels 9/16" Bolts 8
Hope this helps as this is a 1981 Manual
81ChevyCheyenne Edited by: 81ChevyCheyenne at: 3/23/06 1:38 pm
Post by: wideboots on March 24, 2006, 07:30:00 pm
Thanks for the input.