73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Heating, Ventilation & Air Conditioning (HVAC) => Topic started by: Lmbull on November 25, 2011, 01:01:03 am

Title: Help! 84 K10 heat selector vacuum source question
Post by: Lmbull on November 25, 2011, 01:01:03 am

I just picked a '84 K10 short bed that's needs some TLC.  I have heat through the vents on the front of the dash whether the selector is set to "off" or another setting. I'd swear I read somewhere that the vacuum source for the heat selector came from somewhere on the AC. The truck had AC but it was removed. I would very much appreciate any help that could be provided. I live in Ohio so defrost is an absolute must.

Title: Re: Help! 84 K10 heat selector vacuum source question
Post by: bake74 on November 25, 2011, 10:27:33 am

     Did you check to make sure the selector switch is actually moving the flap between forward and defrost ?

Title: Re: Help! 84 K10 heat selector vacuum source question
Post by: Lmbull on November 27, 2011, 08:12:22 pm

The problem was a cracked hard plastic vacuum line that connected to a T from the reservoir.

Sent from my DROIDX using Tapatalk

Title: Re: Help! 84 K10 heat selector vacuum source question
Post by: bake74 on November 27, 2011, 11:23:55 pm

     Cool, at least you now got it fixed or shortly will.