73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: burkitk on January 22, 2012, 05:34:53 pm

Title: steering column
Post by: burkitk on January 22, 2012, 05:34:53 pm

could anyone tell me if a steering column out of a 90 blazer will fit a 87 pickup?

Title: Re: steering column
Post by: 87454westernhauler on January 22, 2012, 05:48:20 pm

if it is a full size K5 blazer yes it should work. but if it is an s10 series it wont work.

Title: Re: steering column
Post by: burkitk on January 22, 2012, 05:55:51 pm

thanks.  it is a full size.  i thought it looked the same didnt know if something was different where it mounts

Title: Re: steering column
Post by: Captkaos on January 22, 2012, 06:34:10 pm

Same from 73-87 as far as mounting.

Title: Re: steering column
Post by: Blazin on January 22, 2012, 08:59:01 pm

As far as mounting yes, but the pin position in the plugs might be off.

Title: Re: steering column
Post by: gto109 on January 22, 2012, 09:27:32 pm

let us know if the pins are right i just got one out of a 90 suburban for my 85 but i can't put it in for a little bit.

Title: Re: steering column
Post by: Captkaos on January 23, 2012, 10:52:30 am

83-87 should be the same, and depending on the donor, you should be able to just swap out the switch.

Title: Re: steering column
Post by: burkitk on January 25, 2012, 09:58:15 pm

thanks for the help.  It bolted right up the only plug i had to change was the backup light