73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: seventyx3 on February 19, 2012, 09:12:31 pm
-
Can a 3/4 ton lower control arm assembly be used in place of a 1/2 ton? The spindle would remain 1/2 ton. The 3/4 ton lowers are less expensive. Are the bushings easier to replace on the 3/4 ton lower control arm shaft? All 2wd drive trucks. My 1/2 ton bushings need to be pressed in by a machine shop and the nearest established shop is 80 miles away.
-
I honestly can't remember this for sure, but I think the balljoint won't work...