73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: elloco86 on April 18, 2012, 11:26:42 pm

Title: 345/35/18r Hoosier on 18x9.5 Boss 338
Post by: elloco86 on April 18, 2012, 11:26:42 pm

Has anybody used these before. I got these on the rear of my 86 c10 and there a small rub on the inner fender well about an inch and a half. I was wondering if anybody ever used spacers.

Title: Re: 345/35/18r Hoosier on 18x9.5 Boss 338
Post by: elloco86 on April 19, 2012, 11:58:13 am

here are my 338 on hooiser's

Title: Re: 345/35/18r Hoosier on 18x9.5 Boss 338
Post by: Captkaos on April 19, 2012, 12:03:40 pm

The rub on the inside or outside?  I measure a long time ago and found you could fit a 14" wide tire in the back and not rub with the right backspacing.  I would run a quality set of wheel spacers.

Title: Re: 345/35/18r Hoosier on 18x9.5 Boss 338
Post by: elloco86 on April 19, 2012, 04:05:56 pm

The back side of the tire rubs a little against the wheel well but only when I'm getting out of the drive way if I take a hard turn into a fishtale