73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: seventyx3 on April 30, 2012, 12:04:25 am

Title: roof support windshield frame dents
Post by: seventyx3 on April 30, 2012, 12:04:25 am

I have uniform "dents" on the right and left side interior front roof supports on my 78.  Are these from the factory?  My 75 doesn't have them.

Title: Re: roof support windshield frame dents
Post by: bake74 on April 30, 2012, 07:07:35 am

    Can you post some pics ?

Title: Re: roof support windshield frame dents
Post by: PromiseKeeper on April 30, 2012, 07:23:13 am

It sure is Monday morning and I need to slow down! I thought you said you had dents in your windshield! :P

Title: Re: roof support windshield frame dents
Post by: bake74 on April 30, 2012, 07:58:48 pm

Quote from: PromiseKeeper on April 30, 2012, 07:23:13 am

It sure is Monday morning and I need to slow down! I thought you said you had dents in your windshield! :P

     WOW, promisekeeper did you have a great weekend or what ?  I know sometimes it is hard to check your brain back into work mode after a great weekend.   

Title: Re: roof support windshield frame dents
Post by: jaredts on April 30, 2012, 10:08:22 pm

Spotwelds?

Title: Re: roof support windshield frame dents
Post by: seventyx3 on May 01, 2012, 11:41:10 pm

Not spot welds. They are a couple inches above the dash on both sides just below where you might locate a gauge pod on the pillar.

Title: Re: roof support windshield frame dents
Post by: Captkaos on May 03, 2012, 03:15:46 pm

Sounds like spot welds, take a picture.

Title: Re: roof support windshield frame dents
Post by: Blazin on May 06, 2012, 12:37:19 am

Judging by your last discription I am going to assume your talking about the A pillars.
They are indents for screws to go into for the interior trim.