73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: 1984gmchighserria on May 10, 2012, 09:12:56 am

Title: bolts size
Post by: 1984gmchighserria on May 10, 2012, 09:12:56 am

Does any one know the. 2 bolt sizes of the 1985 700r4 np208 bolt to the crossmember?

Title: Re: bolts size
Post by: bake74 on May 10, 2012, 07:24:45 pm

     Does it have welded in nuts on the cross member ?

Title: Re: bolts size
Post by: 1984gmchighserria on May 10, 2012, 07:51:34 pm

No, should it.

Title: Re: bolts size
Post by: bake74 on May 12, 2012, 12:40:37 pm

     If it does not, just use 3/8" or 7/16" if it will fit with some nylock nuts so they wont back off.

Title: Re: bolts size
Post by: 1984gmchighserria on May 13, 2012, 02:15:01 am

Its the bolts that bolt the cross-member to the transmission.

Title: Re: bolts size
Post by: bake74 on May 13, 2012, 12:45:07 pm

     Ah, I am out of town with the wife, but if nobody has answered by tomorrow when I get to work, I will pull my 208 off the shelf and get you the bolt size and thread pitch.

Title: Re: bolts size
Post by: bake74 on May 14, 2012, 12:02:53 pm

     So I checked my 208 on the shelf when I got into work, seems that I do not have the bolts for the crossmember, someone else is going to have to chime in with the size.

Title: Re: bolts size
Post by: 1984gmchighserria on May 14, 2012, 12:05:16 pm

Thanks aways blake74