73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: nitewolf on June 07, 2012, 02:18:10 pm

Title: A few questions
Post by: nitewolf on June 07, 2012, 02:18:10 pm

Here is what i have 76' C20 fleet side longbed

What I need is the length and size of the bed to frame mounting bolts. I know there are 6 short and 2 long bolts.

The other questions is: my truck as a a cruse control unit and 2 speedo cables is it possible to just bypass the cruse control unit and go to one speedo cable? If so do I just buy the cable that is not for cruse control?

Thanks in advance.

Title: Re: A few questions
Post by: Captkaos on June 07, 2012, 02:55:17 pm

I don't remember the sizes right off but it has been covered here before.  Have you searched the forum?
you can bypass the cruise for your speedo.

Title: Re: A few questions
Post by: DnStClr on June 08, 2012, 09:00:20 pm

Here's a bolt kit on ebay. Better hurry- only 2 days left,
 http://www.ebay.com/itm/73-87-Chevy-GMC-Truck-Bed-Bolt-Installation-Kit-/290723444844?pt=Motors_Car_Truck_Parts_Accessories&hash=item43b077b86c&vxp=mtr

Title: Re: A few questions
Post by: nitewolf on June 09, 2012, 02:26:07 am

thanks for your input, i will most likely have more questions as time goes on. this is my first Chevy truck and non computer controlled rig.