73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: 1979C20 on July 26, 2012, 08:39:07 pm
-
Can I put an HEI distributor cap and coil on an ESC distributor and have it work the same? Its on an 89 gmc suburban 2500 with a 350. I dont know how the ESC hooks yo the distributor so thats why I am asking if it is possible.
-
Yes this is exactly what I did with my recent build, because I didn't see. The need to buy a new dizzy. There are two wires you splice and join. Then you unplug the esc controller. And you now set the timing
-
Wont that throw an esc code?
-
My esc is unplugged and no codes... if you have to worry about emissions. Thenthis may not be for you.someone else may chime in. :-)
-
no code, here you go:
(http://73-87.com/7387garage/drivetrain/escrepl/plug1.jpg)