73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: Zeked on July 31, 2012, 01:08:07 pm

Title: One Piece Windows for a '87
Post by: Zeked on July 31, 2012, 01:08:07 pm

I bought the one piece window kit for my 87 short step.   And the only question that comes to mind  is " do I really have to grind the door hinge nuts flush?"    The instructions say that it "sometimes" necessary.   Has anyone with an 87 done this either way?

Thanks
Zeke

Title: Re: One Piece Windows for a '87
Post by: Jason Wiechec on July 31, 2012, 03:13:09 pm

it's on to do list let me know how it works out

Title: Re: One Piece Windows for a '87
Post by: Captkaos on August 01, 2012, 09:02:32 pm

Put them in there and test them out.  If have put them in a couple and the only trucks I had to grind were aftermarket.  Of course a couple were aftermarket and I didn't have to do anything with them..
I always gut the door and drill the holes and mock them up without anything and verify they roll up/down.  The are in my 89 Blazer project and will end up in my 87 also.