73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Mike Phillips on August 25, 2012, 01:01:11 pm

Title: 1980's Chevy 4x4 Question: Swapping in 700R4/NP208 for 350/NP208
Post by: Mike Phillips on August 25, 2012, 01:01:11 pm

1980's Chevy 4x4 Question: Swapping in 700R4/NP208 for 350/NP208

Transmission went out of buddies truck and wants to know if a 700R4/NP208 will more or less work to swap in?

I put a 700R4/NP208 into my Jimmy but it's been a while since I made the swap.

Anything to look out for?

:)

Title: Re: 1980's Chevy 4x4 Question: Swapping in 700R4/NP208 for 350/NP208
Post by: Captkaos on August 28, 2012, 05:44:49 pm

If you have all the associated parts it will easily swap, If it is earlier than 82, you may have to drill holes for the T-case crossmember.