73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Performance => Topic started by: Trimmy on February 10, 2013, 09:06:53 pm

Title: Cam/Valve Spring Question
Post by: Trimmy on February 10, 2013, 09:06:53 pm

I get my block and vortec heads back from the machine shop tomorrow and am installing an RV cam into the motor. the specs are

204/214
278/288
421/444

Will the stock vortec springs be able to handle this cam? I do not get into my truck hard so it will probably never see redline.

Title: Re: Cam/Valve Spring Question
Post by: Engineer on February 10, 2013, 10:21:29 pm

Probably, but you should contact your cam manufacturer. They should have a tech line that will tell you what you need to know.