73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Performance => Topic started by: Fairlane514 on February 12, 2013, 07:05:31 pm

Title: Used hydraulic roller cams
Post by: Fairlane514 on February 12, 2013, 07:05:31 pm

Anyone have a source for good used hydraulic roller cams?

At this point I would like to find a LT1 cam from a 1995-97 Corvette or Camaro. Specs are  201/208 (@ 50)  .447/.459 on a 112 lobe.

Thanks

Title: Re: Used hydraulic roller cams
Post by: 454Man on February 12, 2013, 10:36:47 pm

http://dallas.craigslist.org/ndf/pts/3556236076.html

I know its a good way away but...

Title: Re: Used hydraulic roller cams
Post by: 454Man on February 12, 2013, 10:38:57 pm

Dang wrong years...

Title: Re: Used hydraulic roller cams
Post by: Engineer on February 13, 2013, 06:56:43 am

Swap meet, but with out a way of degreeing the lobes, and measuring lift, you are at the mercy of the seller's word.

Title: Re: Used hydraulic roller cams
Post by: VileZambonie on February 27, 2013, 05:29:19 pm

I think I have one. No lifters though

Title: Re: Used hydraulic roller cams
Post by: Fairlane514 on February 27, 2013, 05:46:20 pm

I found a used Crane hydraulic roller....104224. Decent numbers, 214/220 @.50  452/465 on a 112, 1.5 rocker ratio.

Thanks for your help.