73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Power Windows & Door Locks => Topic started by: MWiatr on March 05, 2013, 09:34:46 am

Title: Power windows and locks...
Post by: MWiatr on March 05, 2013, 09:34:46 am

Hello everyone, new to the forum and I just bought a 1981 k10.
So I have to re do the interior in it, and first problems are power windows and locks, the windows go down but not up, and Locks don't do anything. If someone could turn me the right direction to get started on something would be greatly appreciated. Thanks

Title: Re: Power windows and locks...
Post by: 81_Chevy on March 05, 2013, 09:53:59 am

Welcome to the site from SE South Dakota!

start by checking to see if you have power to the different wires, also look in the technical section and look for a wire diagram to see what the different wires at the have 12+ to them.

im sure others will chim in with there opinions.
-Nic

Title: Re: Power windows and locks...
Post by: Captkaos on March 05, 2013, 12:41:03 pm

Sounds like a bad switch but check your wires.

Title: Re: Power windows and locks...
Post by: MWiatr on March 05, 2013, 10:37:47 pm

Have power on both sides, passenger window will go down but not up, even when helping it by hand...

Title: Re: Power windows and locks...
Post by: 81_Chevy on March 06, 2013, 09:42:39 am

check yours switches then on your doors.