73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Cruz.cab on March 28, 2013, 05:33:08 pm

Title: Serpintine belt
Post by: Cruz.cab on March 28, 2013, 05:33:08 pm

I'm thinking about changing from vbelts to the serpintine belt but I'm confused on what accs holes I need or is there a setup that I wouldn't need to use these holes I only have one hole in the pass head

Title: Re: Serpintine belt
Post by: Twin_Turbo on March 28, 2013, 06:08:01 pm

For an F body setup you need this hole on the pass head:

(http://www.vettemod.com/forum/imagehosting/250584785daaa7.jpg)

behind the tensioner, it's the lower hole.

same spot as on the drivers side where the stud is (under the hose end in the pic)

Title: Re: Serpintine belt
Post by: Cruz.cab on March 28, 2013, 08:31:03 pm

Um I'm still confused so I have a hole for the alternator but am I supposed to have one or 3on the passenger side

Title: Re: Serpintine belt
Post by: Twin_Turbo on March 28, 2013, 08:34:38 pm

cast iron heads? There are actually  several different patterns and not all heads have all the holes. what exactly do you have?

Title: Re: Serpintine belt
Post by: Cruz.cab on March 28, 2013, 08:50:04 pm

882 is the casting number