73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: cwest on April 12, 2013, 01:43:15 pm

Title: My ebrake cable isn't putting tension on the pedal to pull it back
Post by: cwest on April 12, 2013, 01:43:15 pm

Does that sound like a stretched cable or a bum spring in the drum itself?  I'm just looking for some general thoughts before I go tearing into something I don't need to.  Thanks for any input

Title: Re: My ebrake cable isn't putting tension on the pedal to pull it back
Post by: 79gmc15 on April 12, 2013, 02:27:43 pm

Make sure you adjust your rear brakes, if that doesn't work then tighten the e brake bolt under the drivers seat by the frame.

Title: Re: My ebrake cable isn't putting tension on the pedal to pull it back
Post by: VileZambonie on April 12, 2013, 07:31:57 pm

You need to pull the drums, clean and inspect. Ensure the shoes are fully seated on the anchor pin and adjust the shoes. Don't mess with the cable until you do so.