73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: jhonijim on April 29, 2004, 01:37:00 pm
-
can i cut the coil spring to lower mw 2wd 81 i was reading that people do it to honda crx's to lower them and was jus wondering i dont care bout the ride it cant get worse than it is
might as well have the axle and arms welded in place
-
this is what mine use to look like with one coil cut in front and 3" Bell Tech dropped spindles. The rear is a Bell Tech flip kit and some leafs removed. Toys are my game
-
how much drop do you get by cutting one coil also what would happen if i slowly heated the stock coil while under cotroled presure as to shoten it im looking to get 4 inches out of my front end with out speneding any money or at least little as possible and as i said be for the thing rides like @#$% with stock suspenson i want to get the weight closer to the ground for less roll around corners and with my new rims i dont have much to spend and i still need to buy paint