73-87chevytrucks.com

General Site Info => Welcome => Topic started by: bowtidePRIDE87 on May 03, 2013, 09:38:29 pm

Title: NEW TO THE SITE..FEW ???'S
Post by: bowtidePRIDE87 on May 03, 2013, 09:38:29 pm

looking to maybe put a cam in my  87 gmc.. just had a few ???'s ...looking for some help

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: zieg85 on May 03, 2013, 10:13:43 pm

Welcome from NW Indiana

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: bake74 on May 04, 2013, 08:29:44 am

      Welcome to the site from California.

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: bowtidePRIDE87 on May 04, 2013, 03:35:08 pm

hey thanks guys...im down here in central florida... not a big gear head... i have a pretty much stock 350... i was thinking of power adders.. check this out.. http://www.jegs.com/i/Edelbrock/350/2097/10002/-1?parentProductId=            they guarantee 435hp.. wondered if it would be too much for a stock 1/2 ton ????

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: Captkaos on June 11, 2013, 05:07:42 pm

That power is assuming that you have a good bottom end with the recommended specs and the power is probably at the crank with no accessories...

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: 74 C-10 Shorty on June 11, 2013, 09:44:51 pm

Welcome from California.

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: Irish_Alley on June 12, 2013, 01:04:12 am

welcome from maryland

Title: Re: NEW TO THE SITE..FEW ???'S
Post by: 1982 Daily Driver on June 12, 2013, 09:01:19 am

Welcome from South Carolina.