73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Z71Gladiator on June 21, 2013, 05:39:35 pm
-
How do I find what kind of transmission I have and will a 350 small block transmission bolt right up to a 454 big block
The truck is a 76 k10 4x4 with a 350 and standard transmission.
The transmission has 3 regular drive speeds plus granny gear.
The granny gear is where 1st gear normally is at the top left.
-
A TH350 will bolt up to small block, big block and IL6 all have the same bolt pattern.
-
You can id a chevy transmission by the pan in most cases. Google chevy transmission identification or something similar and you should get pictures of pans. If you are putting a big block in you may want to start hunting down a built transmission for the purpose. I think a th400 is the only trans I would trust in stock form behind a big block.
-
To answer your question you are describing a SM465 manual transmission with the granny low
-
Yes, your describing a SM465 trans. The 454 will bolt up to the bellhousing without any problems. One concern you will have to deal with is the flywheel...the 350 engine has an internal balance & the 454 is external balance. Lorne
-
x3 about the sm465
-
Google chevy transmission identification or something similar and you should get pictures of pans.
Auto trans ID's are in the tech pages:
http://forum.73-87chevytrucks.com/smforum/index.php/topic,11124.0.html