73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Heating, Ventilation & Air Conditioning (HVAC) => Topic started by: tigwelder on November 10, 2013, 08:33:02 pm
-
1985 K 20 factory air. blower motor only works on high . had 3 speeds a month ago.any ideas?
-
Have you checked the connections at the resistor?
-
No, where is it located? thanks
-
The resistor is located under the hood on the top side of the a/c evaporator housing.
-
I WILL CHECK IT..
-
Also, you may want to move and slightly wiggle the fan blower speed switch between fan settings on the HVAC control. The contacts within the switch may have a bit of corrosion, especially if the blower fan switch hasn't been operated in a while.
FYI- I had similar issues arise this morning...