73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Brakes and Braking Systems => Topic started by: jpatters13 on November 23, 2013, 04:42:03 pm
-
I just bought and 84 Chevy K10 Silverado with a 305 and 700R4 tranny. Every time I hit the rear brakes at lower speeds they lock up. I bled the lines but no air appeared. Can anyone clue me in on what I need to get them to stock locking up?
Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)
-
Most of the time that is caused by soaked rear brake shoes as a result of leaking axle seals and/or wheel cylinders. Pull your rear drums and take a look.
-
X2
-
If they are way out of adjustment they tend to do this as well.
-
Thanks guys. Sorry for the late reply. I had two cracked brake shoes and my cylinders were leaking. Replaced shoes and cylinders, bled the lines, brakes work perfectly. Thanks again!
-
Thanks for letting us know. It's important to close threads with solutions for people searching later.
-
Thanks for letting us know. It's important to close threads with solutions for people searching later.
X2.... Now I know what is likely wrong w/my brakes!!!
Thanks!!!