73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: Liftedchevy on December 07, 2013, 11:10:11 am

Title: Option Codes
Post by: Liftedchevy on December 07, 2013, 11:10:11 am

How do i figure out the option codes for my 80 3/4. i don't have the sticker in the glovebox or cant find build sheet left under the seat?
thanks

Title: Re: Option Codes
Post by: Captkaos on December 08, 2013, 11:53:13 am

If they aren't in the glovebox or the inner fender there is no way of telling.

Title: Re: Option Codes
Post by: 8lugnutz on December 13, 2013, 03:32:54 pm

The GM Heritage Center should be able to provide you with your option codes from the factory by providing the invoice.  Cost is $50.

http://www.gmmediaarchive.com/

Title: Re: Option Codes
Post by: Liftedchevy on December 13, 2013, 08:22:08 pm

Thanks for the help. its ashame that is not free anymore.

Title: Re: Option Codes
Post by: SILVERADO on December 16, 2013, 08:39:00 pm

I tried the Heritage Center on my 82 C20 6.2 about 2 months ago. They ackownledged my request but nothing since.

Title: Re: Option Codes
Post by: mike357 on December 16, 2013, 11:12:08 pm

If it still has the original seat in it, then the build sheet may still be in it. I bought a 77 a few months ago and it still had it. Then a few weeks ago I bought an 80 and it was there as well. If it is there then you will have to be careful getting it out. It will probably be kinda crusty.