73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: Tazman on December 23, 2013, 01:24:59 pm

Title: Pivot Shaft
Post by: Tazman on December 23, 2013, 01:24:59 pm

The rubber bushings on the lower pivot shafts are starting to make noise when they dry out.White lithium grease does the job till it rains,but I know this is just a band aid.I know the rubber bushings will need replacing but my question is this.Should I replace the shaft at the same time and will both upper and lower need to be done,or just the lower.
Thanks

Title: Re: Pivot Shaft
Post by: dvdswan on December 23, 2013, 01:50:32 pm

IMO, anti-sieze works better than lithium grease.