73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: gotsmeuhh350 on February 24, 2014, 10:44:23 am
-
I was just wondering if anyone knew how long the trans lines are. I've got a compression fitting on each line that's leaking, plus another leak on the clip of the oil pan. It's all ice and snow so I would like to spend the least amount of time under the truck as I can. Lol just so I can go in and get the right length the first time. If anyone knows it would save a lot of hassle. It's an 86 c15 rclb, 305 700r4. Thank you
-
Are you wanting to replace them or fix them ? It is kinda hard to know the exact length considering they are bent in several area's.
You can buy kits to bend your own to match, or just buy them pre-bent.
Or are you looking to just cut off the ends and fix them and see if there is enough length still to work that way ? They do not leave much room on those lines to pull or stretch them out any.
-
I'd like to just replace them. I was just wondering if anyone had replaced them and knew what length they got is all. I was gonna get just straight tube and bend my own.
-
In that case just hold on for awhile, there has been several members who have replaced their own lines with kits, give them a chance to see this thread and I am sure you will get a couple of answers of the kits they used and how much they needed, probably how much they had left over to.
-
Alrighty, I will do that. Thank you