73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Seats and Restraints => Topic started by: cjk3500 on March 02, 2014, 06:01:03 am
-
I'm 6'2" with long legs and even with thin 240z bucket seats all the way back against the cab it's still tight. It seems like maybe if I had low back buckets I could get them under the support the runs below the rear window. Or has anyone used a different throttle bracket that puts the pedal closer to the firewall? I'm not worried about the brake pedal because I don't use it much :) and I'm a two foot driver. Any ideas would be great. Why didn't GM make an extended cab until 1988???????
-
post pics. You may be too low.
-
Agreed, Let's see what seats you have. I'm 6' tall and I fit with a high quality seat and speakers behind them.
-
I'll see if I can get some pics but it's better with the buckets, with the stock bench it's terrible. I was hoping someone had swapped in another pedal or maybe bent the rod on the existing one.
-
(http://uploads.neatorama.com/wp-content/uploads/2010/09/Fred-Flintstone-Barney-Rubble-Car.jpg)
Could always do what Fred Flintstone and Barney Ruble did. ;D ::)
-
(http://uploads.neatorama.com/wp-content/uploads/2010/09/Fred-Flintstone-Barney-Rubble-Car.jpg)
Could always do what Fred Flintstone and Barney Ruble did. ;D ::)
I've had a truck or two like that over the years
-
Me too! Maybe puddles a lot of fun. Don't need to take a shower after that but it's hard on the electronics :)
(http://uploads.neatorama.com/wp-content/uploads/2010/09/Fred-Flintstone-Barney-Rubble-Car.jpg)
Could always do what Fred Flintstone and Barney Ruble did. ;D ::)
I've had a truck or two like that over the years