73-87chevytrucks.com
		73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: kodalee on March 08, 2014, 10:28:33 pm
		
			
			- 
				I have a 85 k10 with a 350. I bought the summit brand headers and when in 4wheel drive the drive shaft hits the headers right where the collectors are. What can I do to fix this????
			
 
			
			- 
				can you provide a picture? is it a stock 85 350?
			
 
			
			- 
				Its a 350 goodwrench and let me go get a picture and ill post it. It will be hard to see the headers and d/s are brand new
			 
			
			- 
				im not sure if there different but are you sure you got 4x4 headers and not 2wd headers?
			
 
			
			- 
				It wont let me load the picture
			
 
			
			- 
				Here is the picture at were its hitting
			
 
			
			- 
				most times we suggest bending the header out to clear the shaft
http://forum.73-87chevytrucks.com/smforum/index.php?topic=27713.msg230593#msg230593
			 
			
			- 
				Is the truck lifted? Is the transfer case dropped?
			
 
			
			- 
				     Long tube or short tube headers.
			
 
			
			- 
				Buy Hooker headers.
Problem solved.
			 
			
			- 
				They are long tube headers and the truck isn't lifted but I do have a 4inch on it's way here