73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: bob75 on March 20, 2014, 11:31:11 pm
-
getting ready to start the body on a 75 shortbed and had a thought about using 3M emblem tape instead of the stock clips for the moldings...anyone try this or any input
-
idk if it will hold up to the weather. we just got done working on a car trailer, it had trim held on by 3m tape. needless to say the trim didnt come off real easy had to use a razor blade and a real knife to cut it off, and the guy is going to have to buy new stuff
-
It works pretty good. I used it to put the "CHEVROLET" back on my tailgate trim. That was 2/12 years ago or so. Through all the washes, rain, wind, sun and even a vandalism, it's still there. No peeling or separation. I used regular 3M outdoor double sided adhesive tape. Wasn't even there automotive stuff.
-
Just make sure the surfaces are prepped properly and that stuff sticks pretty good.
-
Ditto ^^^