73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: dieselman123 on March 30, 2014, 09:23:52 am

Title: pushrods
Post by: dieselman123 on March 30, 2014, 09:23:52 am

Currently building a 350 with vortec heads does anyone know if I can use the push rods from a 305? If not does anyone have any ideas thanks in advance

Title: Re: pushrods
Post by: VileZambonie on March 30, 2014, 09:58:00 am

Pushrods are pretty cheap. Why not get a new set? People assume they do not wear but they typically endure a tremendous amount of galling and fatigue. Are you running a roller cam block?

Title: Re: pushrods
Post by: dieselman123 on March 30, 2014, 12:43:35 pm

No just a regular flat tappet setup

Title: Re: pushrods
Post by: dieselman123 on March 30, 2014, 12:58:58 pm

I plan on using comp cams kit  12-235-2 which include new springs retainers timing gear and keepers

Title: Re: pushrods
Post by: BADAZ chevy guy on March 30, 2014, 11:46:39 pm

Be careful of the lift on your can. Vortec heads can't go to .050 lift without spring bind!