73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Wheels & Tires => Topic started by: BADAZ chevy guy on April 02, 2014, 01:32:14 am
-
I'm headed out this weekend to get my truck (Finely!) Trouble is, it won't fit on the car dolly with the tires it currently has on it. I need to find a set on stock 15" rims at the junk yard, but I don't know what the center hole size is. HELP? 1977 C10 15" w/ 5x5 lug pattern.
-
Don't know the spec but if you get the steel rims from a 1998 or older you will be fine
-
1988-98 the rims are closer to the frame if that makes sense
-
Thanks for the feed back guys. The reason I need to know the actual size is that most of the wheels in a junk yard aren't still on a vehicle. So, when I find one with the right lug pattern, I'm not sure if it came from a Chevy, Ford, whatever.
-
The pictures is what you should be looking for. These are off my 1992, notice you can't put a small hubcap on it.
-
Thank you. Can you measure the center hole please? I'm not looking for the stock wheels for a resto project. I just the stock center hole SIZE so I can find wheels at a junk yard. I need to get a set of stock tires on the truck to fit the truck on a tow dolly to bring it home.
-
3 1/8" as close as I can measure the oblong hole
-
That's what I needed. Thank you all. Now, wish me luck in the junk yard!