73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Electrical => Topic started by: Neospartan on April 03, 2014, 01:23:46 am

Title: Help with tail lights
Post by: Neospartan on April 03, 2014, 01:23:46 am
I need to know what tail light lens this is. I bought these fenders off Craigslist they are off a 77, but I don't know what the tail lights are off of. And neither does the guy.
Title: Re: Help with tail lights
Post by: 75_chevy on April 03, 2014, 01:35:07 am
what do the letters say toward the bottom?


Sent from my iPhone using Tapatalk
Title: Re: Help with tail lights
Post by: 75_chevy on April 03, 2014, 01:36:23 am
is there a part number or any more markings on the backside of the light


Sent from my iPhone using Tapatalk
Title: Re: Help with tail lights
Post by: Irish_Alley on April 03, 2014, 04:36:01 am
im going to have to say scout II 72-80
International Harvester 69-75
(http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/n9YAAMXQlgtSpk30/$_57.JPG)
Title: Re: Help with tail lights
Post by: bake74 on April 03, 2014, 08:43:14 am
     I am going to agree with Irish, I have a set of step side fenders that I got from pick-n-pull that have the same lenses.  When I sourced new lenses they were IH.  The letters at the bottom of the lenses should read "SAE STIAR 68", that was the stamping IH used during those years.  The one's in Irish's pics say the same thing.
Title: Re: Help with tail lights
Post by: Neospartan on April 03, 2014, 09:22:39 am
Perfect.....where can I find some cheap replacement lens.


Sent from my iPad using Tapatalk
Title: Re: Help with tail lights
Post by: bake74 on April 03, 2014, 10:02:02 am
http://www.andysautosport.com/light_covers/international_harvester.html

http://www.ebay.com/itm/International-Scout-II-Truck-Tail-lights-IH-pick-up-Great-No-Fading-One-Light-/271443576282 ONLY 1 LENSE

http://scoutpluss.com/lights/

http://www.binderbooks.com/scoutparts.htm#Lenses

http://www.shopisasih.com/category/Lighting.html

     You get the idea.  There really isn't a cheap place to get them.
Title: Re: Help with tail lights
Post by: Neospartan on April 03, 2014, 10:16:43 pm
So is there something I could change it too? With a lower cost?


Sent from my iPad using Tapatalk
Title: Re: Help with tail lights
Post by: bake74 on April 04, 2014, 08:02:26 am
So is there something I could change it too? With a lower cost?


Sent from my iPad using Tapatalk

     Sure anything is possible, just pick the one you want and fab up the opening to fit.  I am not sure if there is a direct replacement for another style without fabrication work though.