73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Electrical => Topic started by: chase.grantham.7 on April 09, 2014, 10:39:34 pm
-
I have an 82 silverado, it has a blinker/cruise control stalk without wiper function. I swapped a 6.0 in and I'm wanting to hook up cruise control, it needs a momentary for accel/decel and on/off switch, I wanted to use the stock stalk/switch but I don't think it will work. Every picture of the stock wiring I can find shows a wire with a flat blade that appears to have 2 maybe four terminals on it. Does anyone have the schematics for the stalk I have, it doesn't "plug" in it has a screw that holds it on. I have ordered switches I can mount in the dash but I really want to use the stock parts. Are the "set" and "coast" buttons momentary? How many poles does each switch really have?
-
Did you see the Cruise control info in the tech section?
http://forum.73-87chevytrucks.com/smforum/index.php?topic=25639.0
http://www.73-87chevytrucks.com/techinfo/7387CKMans//Training/1968-1982_Cruisemaster_Cruise_Control.pdf
-
Yes I did now, thanks for the info it's exactly what I needed. I think I have a way to make it work, let me know what you think. I can connect 12v to the center pin and pin 3 will be energized when I switch the cruise on, pin 1 will be energized when I hit the set button and I can connect 1 and 3 to a relay for the resume button, is there anything wrong with this? I am attaching the stock schematics and the directions for cruise for drive by wire.
-
Should work. Let me know what you find. I have a cruise setup for mine that I haven't tackled yet.
-
Finally started to try to tackle this on my truck today. Everything seemed to check out using an ohm meter, but I think after hitting the switch a few times something inside broke. Where there once was a perceivable click from off to on there is now no resistance on the slider until I slide it to resume, and now the leads don't ohm out. I want to get another turn/cruise stalk, but it seems I have an odd year or something; the stalks I find are either turn signal only or are turn/cruise and wiper, my truck's wiper controls are in dash. I've looked on every parts site I can think of rockauto, ,oreileys,autozone,napa, even ebay and can't even find a picture of this stalk. Does anyone have an idea of where to go to find this? I'm attaching a pic of my steering wheel and stalk.
-
Try Dakota Digital HND3...
From orbit on my Android.
-
If you are interested, I sell all of Dakota's stuff...
-
Try Dakota Digital HND3...
From orbit on my Android.
Hey,
I know this is an old thread but I was wondered if you ever solved your cruiser control issue? I'm looking to do an LS swap (n the future) and trying to figure on dealing with this. I hope you can share some kind of update? Thanks.