73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: 76k104x4 on July 11, 2014, 05:44:49 pm
-
After getting my new headers installed the factory plug wires touch the header tubes on my 454. Also I figured it's about time to replace the distributor too so I ordered a distributor, HEI corrected cap, jegs 8.5 cut to fit wires with multi angle boots, plug wire boot heat shields, Moroso wire looms, and a Moroso recurve kit. I can't wait for parts to start showing up. Any suggestions about install?
-
If you are talking distributor, find TDC, make sure your rotor is pointed at #1 cylinder and remove, re-install as you removed.
-
Thanks Bake. Does anyone have any experience with putting in the recurve kit or suggestions on it?
-
This is one thing I have read Truck not running right after a recurve kit. (http://forum.73-87chevytrucks.com/smforum/index.php?topic=21463.msg176299#msg176299)
-
The link isn't working.
-
@ 76k104x4 - try the link now.
@ swilliams - take a new look at your post (http://forum.73-87chevytrucks.com/smforum/index.php?topic=28891.msg241278#msg241278) to see how the "Hyperlink" code is used. ;)
-
Sorry about the messed up link.
Thanks for the correction bd
-
No problem thanks guys. Y'all make this a great site.