73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: sameold on July 27, 2014, 06:57:28 am

Title: 79 cab just set up for heat
Post by: sameold on July 27, 2014, 06:57:28 am

On my 79' K30 scottsdale cab it's just set up for heat.

http://forum.73-87chevytrucks.com/smforum/index.php?topic=21690.15

reading the above tread it seems like Firefighter cut a new hole and flipped the heater core 180 so the tubes are more towards the driverside.

The 85 cab I have now has provisions for heat and A/C.

I forgot to take pic and I will post them later

Title: Re: 79 cab just set up for heat
Post by: bake74 on July 27, 2014, 08:30:08 am

      Is there a question or just a statement here ?

Title: Re: 79 cab just set up for heat
Post by: sameold on July 27, 2014, 08:49:08 am

I am asking if all firefighter did was flip his heater core 180 and make a cover plate for it?
85 top, 79 bottom

Title: Re: 79 cab just set up for heat
Post by: bake74 on July 27, 2014, 06:38:44 pm

     I can not tell you if firefighter did that or Chevy did that in the different years.  Have you PM'd firefighter to ask him this question yet ?

Title: Re: 79 cab just set up for heat
Post by: Blazin on July 30, 2014, 12:26:03 pm

Completely different heater box, outer fan box, heater core. Need to make a pattern from the AC cab, weld in sheet metal to match, then cut out what is left.

Title: Re: 79 cab just set up for heat
Post by: Captkaos on August 17, 2014, 02:28:41 pm

Firefighter removed AC from his truck and went to only head on it. 
Those are the steps to make it work and you have to source a Heat only setup and get rid of the AC housing inside and out...