73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: jaime on August 01, 2014, 12:57:05 am

Title: flip kit installed
Post by: jaime on August 01, 2014, 12:57:05 am

So I just install flip kit but I took measurement and im a quarter inch of one side  one wheel is closer to edge of  of the rear bed fender how can I fix this with out  basically taking everything apart

Title: Re: flip kit installed
Post by: bake74 on August 01, 2014, 07:17:42 am

     Please tell us how you measured, from what points to what points.  Then somebody can give you idea's.

Title: Re: flip kit installed
Post by: jaime on August 01, 2014, 11:22:46 pm

I measured from the chassis to the back of drum 

Title: Re: flip kit installed
Post by: Captkaos on August 17, 2014, 02:06:50 pm

There is no adjustment in the axle. If you want the bed to match you will need to move it...  but give that it is 1/4" can you be sure you measure from the same spot?  The flip kit didn't do this, so did you measure prior?

Title: Re: flip kit installed
Post by: jaime on August 22, 2014, 12:09:07 am

No I didnt measure prior but when I bought t the truck one of the rear tires did have a spacer  which is a querter of an inch thick