73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: bigjoe62b on August 11, 2014, 03:12:59 pm

Title: Stepside two tone
Post by: bigjoe62b on August 11, 2014, 03:12:59 pm

Hi guys. Was thinking about doing the body of my stepside in two tone brown and tan but not sure how the two tone paint was on the bed and rear fenders. Any body have any ideas or any pictures would be great. Thanks guys for any help.

Title: Re: Stepside two tone
Post by: bake74 on August 11, 2014, 07:21:20 pm

     Courtesy of 67-72 Chevy Trucks.
(http://67-72chevytrucks.com/vboard/attachment.php?attachmentid=986555&stc=1&d=1347996634)

Title: Re: Stepside two tone
Post by: HAULIN IT on August 11, 2014, 08:04:02 pm

The 73-80 fenders had side marker lights in them that match the front fenders. When the front went to horizontal in 81 the marker lights in the rear fenders were dropped & where Incorporated into the side of the tail light. This is the way I believe it is.
Of coarse, over the years MANY parts get swapped, fenders, whole beds, ect. so they may show up a different way than original...then factor in a guy with a welder while he is removing the trim, handles, ect. & they may go. If someone has more concrete info, other variations or if this info is incorrect...please speak up. Lorne 

Title: Re: Stepside two tone
Post by: Captkaos on August 17, 2014, 01:03:35 pm

Lorne that would be correct.  no markers in the rear.
If you want to see more factory pics look at brochures.slosh.com

Title: Re: Stepside two tone
Post by: bigjoe62b on August 20, 2014, 09:10:53 am

Thanks guys


Sent from my iPhone using Tapatalk