73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Electrical => Topic started by: Flywheel on October 26, 2014, 07:20:32 pm
-
I have searched and searched. I changed my 74 warning light cluster for an 85 or 86 full gauge cluster. I don't have any back lights after replacing all of the bulbs and my gas guage is dropped below empty. I know it's probably a wiring thing but I'm kinda wiring diagram illiterate lol. Any ideas would be awesome. I'm not worried about the other guages cause I have guages for those already working.
-
The wires changed locations in the plug
We just swapped an 82 cluster into a 77
You have to get the diagram for both and move some wires in the plug
Plus the senders on the engine for temp and oil pressure and different for gauges
-
Ok thank you. I'll check it tonight
-
Ok thank you. I'll check it tonight
I have pics of my home made wiring diagram showing the changes but tapatalk apparently got upgraded recently and I am no longer avail to upload photos?
PM me your email
Maybe I can send em that way
-
Pm sent
-
Got fuel guage working but only 1 blinker and a couple of the lights are working.
-
Did you get my diagram?
-
Yes I used it but I think I have a ground issue.
-
did you get this figured out. You need to verify all of the pins in the cluster harness first or you could short something out.
-
I ended up finding a cluster from a 75. Everything is good now.
-
Since the 73-75 version is AMPS it is never really a good idea for swapping things over without pulling every wiring, but since you were dummy lights it should eliminate that issue. I would think you just had some pins in wrong. Glad you got it figured out though.